If your 12V fridge is buried two-thirds of the way forward in the truck bed, you already know the problem. You climb in, you shuffle a cooler, you climb out, and you do it again every time you want a drink. A fridge slide fixes that in one afternoon of work.
A truck bed fridge slide is a heavy-duty steel tray on telescoping rails that lets you pull a portable fridge out to the tailgate, grab what you need, and push it back in without stepping over the bed rail. Every slide we looked at in this roundup bolts to the bed floor or mounts to the bed rails, holds between 175 and 440 pounds, and locks in both the closed and extended positions so nothing shifts on washboard roads.
We compared 12 slides for 2026, weighing load ratings against measured tray dimensions, extension style, mounting method and the kind of owner feedback that only shows up after a season of use. We also cross-checked the fridge side of the equation against our guide to the best 12V portable fridges for trucks, because the slide that fits your fridge matters more than the slide with the biggest number on the box.
Table of Contents
Top 3 Picks for Truck Bed Fridge Slides in 2026
All 12 Fridge Slides at a Glance in 2026
The table below covers every slide in this roundup with the specs that decide whether it fits your bed and your fridge.
| Product | Specifications | Action |
|---|---|---|
| MORryde SP56-115 Sliding Tray |
|
Check Latest Price |
| Rough Country 99021 Cooler Tray |
|
Check Latest Price |
| ALL-TOP ATFS-30a Fridge Slide |
|
Check Latest Price |
 ARB 10900021 Classic Slide |
|
Check Latest Price |
 SAMOUT SMFS-30 Fridge Slide |
|
Check Latest Price |
 ARB 10900040 Elements Slide |
|
Check Latest Price |
 ICECO JP Pro Series Slide |
|
Check Latest Price |
 ARB 10900048 Zero Slide |
|
Check Latest Price |
 SetPower Universal Slide |
|
Check Latest Price |
 BODEGA Car Fridge Slide |
|
Check Latest Price |
 Camco 51530 Slide |
|
Check Latest Price |
 Ironman 4×4 Fridge Slide |
|
Check Latest Price |
1. MORryde SP56-115 Sliding Tray – the most proven fridge slide in the category
MORryde SP56-115 Freezer Sliding Tray 37.61″ W x 21.6″ D x 3.5″ H Front Pull
225 lb capacity
200% extension
Inner tray 31.4 x 19.7 in
Outer 37.6 x 21.6 x 3.5 in
Pros
- Heavy-duty 225 lb weight capacity
- 200% extension clears obstacles at the tailgate
- Dual safety latches hold the load in travel
- Installs in minutes
- Steel tray carries heavy items as well as fridges
Cons
- 31.42 in inner width will not suit wide Dometic CFX3 units
- Latches may need raising for thick door gaskets
The MORryde SP56-115 is the slide we keep coming back to because it is the only one in this group with a real body of long-term owner feedback behind it. Sixty-nine reviews at a 4.5 average is the deepest sample here, and the tone of that feedback is consistent: sturdy, easy to install, worth what you paid.
The headline spec is the 200% extension. Where most budget trays slide out roughly 75 to 90 percent of their travel, this one pulls out far enough that the fridge clears whatever sits behind the tailgate, so you are not left leaning over the bed rail to reach the far corner of the lid. That is the single feature that separates it from the generic steel trays on the market.
Build quality is where the price difference shows. The tray is welded steel with smooth double slides, and it weighs 68 pounds, which tells you how much material is in the frame before you ever load it. Dual latches secure the unit in travel, and owners running long tracks report it still works after years of heavy use.
The number to check before you buy is the inner width: 31.42 inches at the front pull position. That is generous next to the 29 inch trays in this roundup, but it will not take the widest Dometic CFX3 double-zone units. Measure your fridge first.
What actually fits on the 31.4 inch tray
Most 30 to 45 liter portable fridges and coolers sit on this tray comfortably, including the ARB 12V units owners commonly pair with it. The outer footprint is 37.6 by 21.6 by 3.5 inches, so it drops into a standard pickup bed without cutting anything.
If your fridge is a wide dual-zone model, check the manual before ordering. The outer width closes the gap that other slides leave you.
When to pick a different slide
Choose the Rough Country 99021 or one of the budget trays if you want something lighter, cheaper, and simpler than a full steel frame. Two owners also found the latches needed a slight raise to clear thicker door gasket material, which is a five-minute fix rather than a deal breaker.
2. Rough Country 99021 Cooler Sliding Tray – best value for most truck beds
Rough Country Cooler Sliding Tray for 45 L Portable Refrigerator/Freezer – 99021
250 lb capacity
Ball-bearing slides
31 x 19 x 2.5 in, 60.5 in extended
Hold-down straps included
Pros
- Strong powder-coated steel with good welds
- Smooth one-handed ball-bearing operation
- Dual locks including a second travel lock
- Mounting hardware and four cam-lock straps included
- Adds only about 1 inch of height
Cons
- Some trays arrive with bent side rails
- Tray can squeak and rattle over rough roads
- Actual tray dimensions differ from the listing
- Often needs a latch block raised in van installs
Rough Country built the 99021 around ball-bearing slides, and that is the reason owners describe it as moving with one hand. Multiple installs in truck beds, Jeeps and Avalanches report the same smooth pull, and the tray is a 250 pound rated steel platform that does not flex under a loaded fridge.
It is also the practical pick for anyone running low under a camper shell or a bed rack. At 2.5 inches tall, it adds roughly an inch to the overall height of the fridge setup, which is a meaningful difference compared with some full-height frames.
The package includes mounting hardware and four cam-lock hold-down straps, which removes the most common excuse not to buy a slide. Dual locks hold the tray in the closed and extended positions, including a secondary travel lock on the opposite side.
Be aware it is designed around Rough Country’s own 45 litre portable electric cooler, though it works well as a universal tray for other units of similar footprint. The listed size is 31 by 19 by 2.5 inches and 60.5 inches fully extended.
Why the ball-bearing difference matters on washboard roads
A roller or bolt slide that binds halfway out is the reason people give up on fridge slides. Ball-bearing tracks keep the extension smooth even when the tray is heavy, and that is exactly the feedback this tray generates across truck bed installs.
If you have a wooden or composite bed enclosure, expect some noise. Owners specifically mention squeak and rattle over rough roads in that setup.
When to pick something else
It ships as a bare tray, so you need your own fridge and your own mounting surface. Reach for the ARB purpose-built slides if you already own an ARB Classic, Elements or Zero fridge, or for the ALL-TOP if you want a bigger inner tray at a lower price point.
3. ALL-TOP ATFS-30a Fridge Slide – best budget tray for a 35 to 40 litre fridge
ALL-TOP Fridge Slide (Inner 29.3 x 18.7in) Vehicle Refrigerator Freezer Slider with 4 Buckle Straps, Universal Fit, Max 287 LBS, 3rd Gen
285 lb capacity
Cold-rolled steel, powder coated
Inner tray 29.3 x 18.7 in
Four buckle straps included
Pros
- Heavy-duty cold-rolled steel with industrial bearing rails
- Installs with included stainless screws and bolts
- Four buckle straps for securing gear
- Handles toolboxes and generators as well as fridges
- Three-year warranty with lifetime support
Cons
- One unit received with a non-locking rail and loose bearings
- Straps and hardware occasionally missing from the box
- Weld seams needed filing in a few units
- Tray sits close to the mounting surface
The ALL-TOP ATFS-30a delivers the most load rating per dollar in this roundup. At 285 pounds, the rating sits above most of the metal trays here, and it ships with everything you need: industrial bearing slide rails, two-hand safety handles, four buckle straps and stainless fasteners.
Most owners use it with a 35 to 40 litre fridge, which is the size sweet spot truck campers on r/overlanding and r/TruckCampers consistently name as practical for a family of three. The galvanised cold-rolled steel and thick powder coating handle road salt and washboard surfaces without complaint.
The tray is also a general cargo platform. Owners load toolboxes and generators on it, which is useful if you want one slide to handle both weekend gear and work kit. Our pick for the job side of that is in the truck bed toolboxes roundup.
Quality control is the trade-off. A minority of buyers received units with a right-hand rail that would not lock, loose ball bearings, missing tie-down straps, or weld seams that needed filing and repainting. Inspect the box the day it arrives.
Who this tray fits best
The 29.3 by 18.7 inch inner measurement covers most 30 to 45 litre fridges and standard rotomolded coolers. Check the width of your fridge handle and latch before committing, since the tray sits close to the mounting surface.
It also works as a mounting platform for gear above the tray, which makes it a sensible base for a stackable storage box on top of the fridge.
When to spend a little more
If you cannot tolerate an inspection on arrival, the SAMOUT SMFS-30 uses the same basic layout with a stronger review record for locking behaviour. For higher loads and a heavier fridge, the SetPower slide is rated well above anything else here.
4. ARB 10900021 Fridge Freezer Slide – the clean fit for ARB Classic 37 and 50 quart fridges
ARB 10900021 37/50 Quart Fridge Freezer Slide Accesories
175 lb capacity
26 x 16 in sliding tray
28.5 x 18 x 3 in overall
Epoxy or E-coat finish
Pros
- Slick bearings keep a loaded fridge easy to pull out
- Long-track owners report it still functions after years of use
- Removes the sticky drawer slides used in bed installs
- Proven in SUVs and truck beds
Cons
- Only fits ARB Classic Series 37 and 50 quart units
- Tie Down System 10900010 sold separately
- Residual rattle that is hard to tune out
- Small 26 x 16 in tray for larger fridges
ARB’s drawer-type slide for the Classic Series 37 and 50 quart fridge freezers solves a specific problem: the factory drawer slides ARB shipped in those fridges swell and stick in a hot truck bed. Owners who swapped to this rail describe it as the fix, with bearings that stay slick year after year rather than seizing.
It is a light-duty part of the ARB range at 175 pounds, but a 37 or 50 quart fridge with contents is well inside that number. The epoxy or E-coat finish and plastic construction keep weight at 27.6 pounds, so it does not eat your payload.
What you give up for the perfect fit
The sliding tray is 26 by 16 inches, which is small for anything bigger. If your plan involves a wider Dometic unit later, this slide will not take it.
You also need the ARB Tie Down System 10900010 separately for a secured install, and reviewers note that rattle is hard to fully dial out of this tray.
Who should skip it
Skip it if you run an ARB Zero, Elements, Dometic or ICECO fridge. The fit is model-specific and there is no adjustment. Anyone on a universal slide is better served by the ALL-TOP or SAMOUT trays.
5. SAMOUT SMFS-30 Fridge Slide – locks in both positions and takes an ARB 12V fridge
SAMOUT Fridge Slide (Inner 29.2 x 18.7in) Vehicle Refrigerator Freezer Slider with 4 Buckle Straps, Universal Fit, Max 287 LBS, 3rd Gen
285 lb capacity
Inner tray 29.2 x 18.7 in
30.8 x 20.5 x 2.3 in overall
Three-year warranty
Pros
- Heavy solid build that holds weight without flex
- Blue-tab latches lock in open and closed positions
- Holds up over rough dirt and washboard roads
- Works with an ARB 12V refrigerator
- Strong value against premium slides
Cons
- Bundled tie-down straps are awkward to fit
- Tray is wider than some mid-size coolers
- Twin side locks can reduce usable space above the tray
The SAMOUT SMFS-30 shares its basic dimensions with several other budget steel trays, but it is the one we would trust first. It carries the highest rating of the universal group at 4.6 across 31 reviews, and the recurring theme is a build that does not flex under load.
The blue-tab latches lock the tray both when it is fully extended and when it is closed. That matters more than it sounds: on a downhill grade or in heavy braking, a tray with only one lock position lets the fridge creep, and that is exactly what forum owners warn about driving with the slide out.
Owners confirm it survives rough dirt and washboard roads in camper van builds, and one specifically reports using it with an ARB 12V refrigerator, which tells you the fit is more flexible than the frame width suggests.
It is a cold-rolled steel tray with galvanizing and thick powder coating, rated to 285 pounds evenly loaded, with full-extension industrial bearing slide rails and two-hand safety handles.
Swapping the included straps
The bundled buckle straps are the most common complaint. Owners frequently fit their own hook-and-loop or cam straps instead, which takes five minutes and gives a better hold on a fridge lid.
Measure first: at 29.2 by 18.7 inches inner, the tray is wider than some mid-size coolers, and the twin side locks can eat into the space above the tray.
Who should pick it over the ALL-TOP
Pick the SAMOUT if lock security in both positions and a stronger review record matter to you. Pick the ALL-TOP if you want the longer warranty and do not mind inspecting the unit on arrival.
6. ARB 10900040 Elements 63QT Fridge Slide – overbuilt hardware with a drain hole
ARB 10900040 Fridge Freezer Slide Exclusively for ARB 10810602 Elements 63QT Weatherproof Ideal to gain Access to Food and Drinks
Fits ARB Elements 63QT
Sealed roller bearings
Drain hole in mounting plate
Interchangeable release lever
Pros
- Overbuilt construction that holds the fridge firmly
- Sealed bearings with lock-in lock-out at any angle
- Laser-cut drain hole empties the fridge in place
- Release lever mounts on either side
- Fits a Dometic CFX75DZ
Cons
- Only fits the ARB Elements 63QT fridge
- Heavier than comparable slides
- ARB tie down kit is advisable off road
This slide is the most over-engineered of the ARB options here. Zinc plated steel with a black epoxy E-coat finish, sealed roller bearings with lock-in lock-out, and permanent mounting holes in the base. The 4.6 rating comes from a small review set of 21, but nothing in those reviews reports a quality problem.
The detail that earns its place is the laser-cut hole in the mounting plate. It lets you drain meltwater from the fridge without lifting it out of the slide, a small engineering choice that removes a genuinely annoying task on every trip.
How it fits the Elements 63QT
Closed dimensions are 884 by 579 by 79 millimetres with an extended total length of 1,573 millimetres, and the tray itself measures 879 by 525 by 47 millimetres. The unit weighs 38 pounds, so budget for two people when lifting it into the bed.
One reviewer bought it specifically as a Dometic CFX75DZ alternative, and the fridge foot retainers keep the unit from shifting on rough roads.
Who should skip it
Skip it unless the Elements 63QT is your fridge. The tray is sized for that unit, and if you own anything else you are back to a universal tray. For off-road use, owners recommend adding the ARB tie down kit even though some skip it.
7. ICECO JP Pro Series Slide – purpose-built fit with thin-gauge steel
ICECO Slide Mount for JP Pro Series Portable Refrigerator Freezer, Car Fridge Freezer Slide (Slide for JP30 Pro/JP40 Pro/JP50 Pro)
Fits JP30 Pro, JP40 Pro, JP50 Pro
Three position locking
27.5 x 17.5 x 2.1 in
Steel slide rails
Pros
- Correct purpose-built fit for the ICECO JP Pro series
- Three position locking mechanism
- Handles a 40 quart fridge for entry-level use
- Reasonable price for a brand-matched slide
Cons
- Lightly built with thin-gauge metal that flexes
- Bolt and screw holes arrive loose and hardware missing
- About an inch of lateral play even when locked
- Plastic bumpers cracked within about a year
The ICECO slide fits the JP30 Pro, JP40 Pro and JP50 Pro fridges correctly, and the listing also covers the VL35 ProS, VL45 ProS, VL45S and APL35. For an ICECO owner who wants a guaranteed fit rather than a measured guess, that is the appeal.
It is also the lowest-rated product in this roundup at 4.0 stars, with 14 percent one-star reviews. The complaints cluster around the same theme: light construction. Thin-gauge metal flexes under load, bolt holes arrive loose, and one unit showed roughly an inch of lateral play in the glides even when locked.
It also has a three-position locking mechanism, which is a better safety story than a single-position latch, and the metal slide rails are simple and serviceable.
The hardware story is the weakest part. Owners report loose bolt and screw holes on arrival with some hardware missing, plus one lever rod and frame arriving bent.
Is the plastic bumper a real problem?
Yes for anyone running rough terrain. The plastic bumpers at the rear of the slide cracked off within about a year on at least one build, and they are not sold as spare parts, so the fix means replacing the slide.
If your truck stays on highway and mild gravel, the ICECO is a reasonable low-cost option for its guaranteed fit.
Who should pick something else
If you are not locked into an ICECO JP Pro, the SAMOUT or ALL-TOP trays give you a heavier frame for a similar outlay. This slide is worth it for fit alone, not for build quality.
8. ARB 10900048 Zero Fridge Slide – full extension for the ARB Zero 63 and 73 quart
ARB 10900048 Fridge Slide for Fridge Model Zero 63Qt/73Qt, Solution to gain Access to Food and Drinks
Fits ARB Zero 63 and 73 quart
Sealed roller bearings
37.24 x 17.48 x 3.11 in
Drain hole in mounting plate
Pros
- Purpose-built full-extension slide for the Zero fridges
- Sealed bearings with lock-in lock-out hold at any angle
- E-coat finish resists corrosion
- Fridge foot retainers and permanent base holes
- Drain hole empties the fridge in place
Cons
- Only fits ARB Zero 63 and 73 quart models
- Most expensive slide in this roundup
- Narrow 17.48 in tray width limits fridge options
The ARB Zero is a tall, deep fridge, and the 10900048 is the rail built for it. This is a full-extension slide: closed dimensions are 946 by 444 by 79 millimetres, and extended it reaches 1,669 millimetres, so the fridge comes all the way to you instead of stopping halfway across the tailgate.
The same sealed roller bearing with lock-in lock-out that ARB uses on the Elements slide holds position at any vehicle angle. That is the feature that stops the fridge creeping downhill when the bed is open, and it is why these ARB rails keep showing up in long-term builds.
Reviews are few but clean. Out of 16 ratings, 84 percent are five star, and no reviewer reported a build or finish problem. The laser-cut drain hole and the flat mounting base with permanent holes come up repeatedly as the details owners appreciate.
It is the most expensive slide we tested, and that is worth saying plainly before you commit.
What the narrow tray means for you
At 17.48 inches wide with a 930 by 404 millimetre tray, this rail is narrow. It is dimensioned for the Zero 63 and 73 quart footprint, so a different brand of fridge will not sit squarely on it.
If you plan to swap fridge brands later, a universal tray is the safer purchase.
Who should skip it
Skip it unless you own a Zero 63 or 73 quart and want the full-extension travel. ARB Classic owners need the 10900021 instead, and Elements owners need the 10900040.
9. SetPower Universal Refrigerator Slide – the highest load rating we found
SetPower Universal Refrigerator Slide Mount – Compatible with SetPower Portable Refrigerator Car Fridges (Excludes AJ & AB Series), Electric Cooler Slide for Truck, SUV, Vans
440 lb / 200 kg rating
Single one-hand lever
Three lock positions
Four fixing straps included
Pros
- Single central lever operated with one hand
- Sturdy with no rattle even with fridge wheels on
- Fits larger SetPower units such as the RV60D and RV65D
- Four fixing straps included and hold well
- Installs with nutserts for a permanent floor mount
Cons
- Mounting hardware is not included
- Can be noisy over washboard roads
- Some lateral play in the rails
- Excludes AJ
- AB
- RF30 and PT30 models
At 200 kilograms, the SetPower slide carries the highest load rating of anything in this roundup by a wide margin, and at 4.9 stars from 13 reviews it also ties for the top rating. Owners running it in 4Runner, Gladiator, Range Rover and Jeep builds describe the same thing: a solid, rattle-free feel.
The single central lever is the detail we like most. It locks in three positions, closed, half open and fully extended, and it can be operated one-handed. That matters if you are standing at the tailgate with a full cup in the other hand.
It is oxide-coated heavy-duty steel rated at 200 kilograms or 440 pounds, with four polypropylene fibre fixing straps included, and it fits the larger SetPower portable fridges such as the RV60D and RV65D.
Install it with nutserts for a permanent floor mount. The one thing to note is that mounting hardware is not included with the slide, which surprises people who assume a complete install.
Does it suit non-SetPower fridges?
The tray is a universal fit for most SetPower portable refrigerator models, and reviewers describe larger units sitting on it well. It excludes the AJ, AB, RF30 and PT30 models, so check your model number before ordering.
Measure the tray anyway. SetPower does not publish the tray footprint in the listing, so confirm against your fridge dimensions.
Trade-offs to accept
Owners report noise over washboard roads and some lateral play in the rails. The weight is 13.2 kilograms, so this is not a light slide to lift into a high bed alone.
If you carry a large dual-zone fridge plus gear on top, this is the rating headroom you want.
10. BODEGA Car Fridge Slide – narrow tray that fits cooler footprints others miss
BODEGACOOLER Car Fridge Slide, Inner 29.4 x 17.2in, Vehicle Refriderator Slider with 4 Buckle Straps, Max 220 LBS/100Kg
220 lb / 100 kg rating
Inner tray 29.4 x 17.2 in
19.5 x 31.1 x 2.48 in
One-hand lock lever
Pros
- Narrowest inner width in the budget group
- Single one-hand lever locks at full extension and closed
- Ball-bearing rails move smoothly
- M6 screws and T-nuts supplied
- Two slides fit side by side in a Jeep
Cons
- Tray length can run about an inch longer than the fridge
- Small amount of play in the closed position
- May need feet to clear a hatch or tailgate
Width is the whole story with the BODEGA slide. Its 29.4 by 17.2 inch inner tray is the narrowest of the budget steel trays, and that means coolers with slim latches and low-profile handles will sit properly where a wider tray leaves them hanging over the edge.
It shares the top rating in this roundup at 4.9 stars from 13 reviews, with 88 percent five star and no ratings below four. It is also the lowest-cost entry here, which makes it an easy recommendation for a first slide.
The build is cold-rolled steel with galvanizing, thick powder coating and an anti-rust spray paint finish, rated to 220 pounds evenly loaded, with double anti-slip clips that keep the fridge from shifting over bumpy roads.
It includes four buckle straps plus M6 screws and T-nuts, so you can mount it to a flat bed floor or a drilled mounting surface without hunting for hardware.
Running two slides side by side
Because the tray is narrow, owners fit two of these in a Jeep and still have room between them. That is a genuine advantage if you run a fridge plus a second cooler or a gear drawer on the same platform.
Check your bed width against the 19.5 by 31.1 inch footprint before planning a side-by-side layout.
Limits worth knowing
The tray length can run about an inch longer than the fridge itself, so a short cooler will sit loose unless you add a stop or a strap. There is also a small amount of play when closed, and you may need feet or an elevated platform to clear a hatch or tailgate lip.
11. Camco 51530 Retractable Slide – smooth ball bearings for vans, RVs and boats
Camco 51530 Retractable Floor Mounted Portable Electric Refrigerator Slide with Durable Steel Construction and Smooth Ball Bearings, Medium
264 lb capacity
Ball bearing slide with safety latch
30.63 x 18.75 x 2.5 in
Mounting hardware and four straps included
Pros
- Sturdy alloy steel tray that carries a loaded tool box
- Ball bearing rails slide smoothly and quietly
- Safety latch locks the slide in position
- One-year manufacturer warranty
Cons
- Real inner tray is smaller than the listing states
- Will not fit a Dometic CFX55
- One shipment arrived without fasteners and straps
- Only 10 reviews for long-term feedback
Camco’s 51530 is a floor-mounted retractable slide that the company positions for trucks, SUVs, RVs, trailers and boats, and owners confirm it works across those platforms. The ball bearing rails slide smoothly and quietly, which is the main thing you notice day to day.
At 264 pounds it is rated for a loaded portable fridge and it doubles as a tool box slide. The safety latch locks the tray in position, and the listing includes mounting hardware and four tie-down straps.
Measure the inside, not the listing
The listing states 30.63 by 18.75 by 2.5 inches, but owners report the real inner tray measures closer to 17 by 29.5 inches. That difference is enough to rule out a Dometic CFX55, so verify before you commit.
It is designed to fit the Camco CAM-350, CAM-450 and CAM-550 portable fridges.
Who should pick it
If your build is a camper van, trailer or boat rather than a pickup bed, the smooth quiet action and the one-year manufacturer warranty make this an easy pick. If you want deep long-term owner feedback, note the review count here is the lowest in the roundup at ten.
12. Ironman 4×4 Fridge Slide – alloy steel for 30L to 50L fridges
IM4x4 Fridge Slide – 30L to 50L Fridges
220 lb capacity
Alloy steel construction
31.2 x 18.7 x 2.5 in
Locks in both positions
Pros
- Locks in the extended and retracted positions
- Ships fully assembled for a straightforward install
- Good quality alloy steel build
- Fridge tie down straps included
Cons
- Only two customer reviews
- so limited long-term feedback
- Fitment limited to 30L to 50L fridges
- 42 pounds is heavy to lift into a high bed
The Ironman 4×4 slide is a side-mount alloy steel tray built for 30 to 50 litre fridges. It locks in both the extended and retracted positions, ships fully assembled, and includes fridge tie down straps, so the install is closer to bolting down a bracket than building a rail from scratch.
At 42 pounds it is one of the heavier units here. That is fine in a standard bed, but it is a two-person lift into a lifted truck.
Read the rating in context
Both available reviews are five star and describe good build quality, easy installation and correct locking in both positions. Two reviews is not a durability record, so treat the 5.0 average as promising rather than proven.
Plan to inspect the welds and bearings yourself on arrival.
Who should pick it
Pick it if your fridge falls between 30 and 50 litres and you want a ready-to-bolt unit with straps included. Pick a universal tray like the ALL-TOP or BODEGA if you may change fridge brands later.
How to Choose a 12V Fridge Slide for a Truck Bed
Most wrong purchases in this category come down to two numbers: the tray footprint and the height it adds. Get those right before you compare brands.
Measure the fridge footprint before anything else
Every universal tray in this roundup has a published inner measurement, and that is the number to compare against your fridge length and width. The ALL-TOP gives you 29.3 by 18.7 inches, the SAMOUT 29.2 by 18.7, the BODEGA 29.4 by 17.2, the MORryde 31.42 by 19.7, and the ICECO slide 27.5 by 17.5.
Do not compare outer dimensions. The ARB Classic tray is listed at 28.5 by 18 by 3 inches overall but only offers a 26 by 16 inch sliding surface, which is the number that decides whether your fridge sits squarely or hangs over an edge.
Front pull tray vs tilt slide vs side pull slide
Everything we tested is a front pull tray, and for a truck bed that is the right default. A tilt slide raises the fridge so you can reach the top of the lid without bending, which helps with tall domed fridges but adds height. A side pull slide runs across the bed and suits wide beds where the fridge sits near one rail.
One of the recurring complaints from overland forums is that factory slides raise the fridge enough to conflict with a bed rack or camper shell. If you run a rack, add the slide profile height to your total fridge height before buying, and low-profile trays such as the Rough Country 99021 add the least.
Load rating versus real world load
Ratings across this group run from 175 pounds on the ARB Classic slide to 440 pounds on the SetPower slide. A 45 litre fridge with a full load typically sits far below any of them, so the rating matters more as a structural quality signal than as a capacity limit.
Be sceptical of ratings on slides with thin-gauge steel. Buyers of the ICECO mount report flex under load and lateral play even when locked, which is a build issue rather than a rating issue.
Bed length, deck height and tailgate clearance
In an 8 foot bed the length question is straightforward: leave enough space behind the closed slide for the fridge to be walked around or for a second piece of gear. In a 5.5 foot bed, extension travel matters more, and a 200 percent extension slide such as the MORryde SP56-115 gives you more usable reach for less bed length.
Check that the tray clears the tailgate and rear bumper when fully out. Owners of low slides note they may need added feet or a raised platform to clear a tailgate lip.
Tonneau covers, camper shells and bed liners
This is where most surprises happen. Truck owners report that a factory slide for a large Dometic unit did not work with their hard bed cover, because the slide stack raises the fridge above the cover’s sealing height. If you run a tonneau or a camper shell, verify the combined height of cover seal, slide and fridge before you order.
Also watch for the tailgate rubbing the tray. Chewing through the bed liner is a common complaint with slides that extend low or sit too close to the gate. Measuring the closed and extended clearance takes two minutes and avoids a hole in your liner.
No drill versus drilled mounting
Most slides in this group are screw-in or bolt-on, and drilling into a composite bed is the usual installation. A Tacoma owner who wanted a lower fridge height built a welded angle iron and square tube tray running in C-channel instead, which is the route to take if drilling is not an option.
Check what is in the box before ordering. The ALL-TOP, Rough Country and Camco slides include mounting hardware and straps, the BODEGA includes M6 screws and T-nuts, and the SetPower slide ships without mounting hardware even though its fixing straps are included.
Frequently Asked Questions
What are the best heavy-duty slides for truck beds?
The heaviest-rated fridge slides in our roundup are the SetPower Universal Refrigerator Slide at 440 pounds, the SAMOUT and ALL-TOP steel trays at 285 pounds, and the Camco 51530 at 264 pounds. For a 45 litre fridge under normal loads any of these carry far more than you need, so pick on tray footprint and locking rather than on the rating alone.
Which truck bed slide is the best rated?
The MORryde SP56-115 is our top-rated choice overall, combining a 225 pound capacity with 200 percent extension and the deepest owner feedback in the category at 69 reviews and a 4.5 average. The SetPower slide carries the highest raw load rating at 440 pounds.
Can I make my own truck bed slide-out rails without drilling?
You can, and truck owners do it often. One common build uses welded 1 inch angle iron and half inch square tube with a riveted aluminium bottom running in quarter inch C-channel. It avoids drilling only if the channel is held with existing bed hardware, so in most beds you will still need through-bolts or rivnuts.
Do fridge slides work with a tonneau cover?
They can, but you must check total height. Owners report a factory slide for a large Dometic unit did not clear a hard bed cover, because the slide stack raises the fridge above the cover seal. Measure the cover seal, slide profile and fridge height together before ordering.
How much weight can a fridge slide support?
Ratings across these slides range from 175 pounds for the ARB 10900021 Classic slide up to 440 pounds for the SetPower Universal Slide. A loaded 45 litre 12V fridge typically weighs far less than either, so the rating is mostly a build quality indicator.
How do I stop a fridge from sliding in the truck bed?
Use a slide that locks in the extended position and fit buckle or cam straps over the fridge. The Rough Country 99021 includes four cam-lock straps, the ALL-TOP and SAMOUT include four buckle straps, and the SetPower slide includes four fixing straps. Closing the tray and locking it is the second layer.
The Best 12V Fridge Slide for Truck Beds in 2026
For most truck owners the MORryde SP56-115 is the best 12V fridge slide you can buy: the 200 percent extension actually gets the fridge to you, the 225 pound steel tray holds a loaded cooler, and 69 reviews at 4.5 stars give you the clearest long-term picture of any slide we tested.
Buy the Rough Country 99021 if you want ball-bearing smoothness and the smallest height increase for a camper shell or bed rack. Go with the ALL-TOP ATFS-30a or SAMOUT SMFS-30 for a lighter tray that still locks in both positions, and pick the SetPower slide if you run a 60 litre or larger fridge and want the load headroom.
Measure your fridge footprint and your bed height first, add the straps to the order, and check your tonneau or camper shell clearance before the drill comes out. That ten minutes of measuring prevents every fitment problem we saw in owner reviews.